PP Rotary Piston Vacuum Pumps

• Customization: Available
• Oil or Not: Oil
• Structure: Rotary Vacuum Pump
• Model NO.: PP-70, PP-150
• Exhauster Method: Positive Displacement Pump
• Vacuum Degree: Vacuum
• Work Function: Fore Pump
• Working Conditions: Dry
• Transport Package: Wooden Case
• Specification: unit
• Trademark: ever-power
• Origin: China
• HS Code: 8414100090
• Production Capacity: 50000units/Year

Product Description

PP Single-Stage Rotary Piston Pumps
PP pumps are quiet running vacuum pumps with high pumping capacity at both high and low pressures. The triplex piston design is inherently dynamically balanced and is practically vibration-free. Even in dirty applications, the PP enjoys unequalled durability, as there is no metal-to-metal contact between the pump piston and the cylinder; clearances are filled with oil.
All PP models include an integral, positive pressure lubrication system to insure reliable lubrication at all pressure levels. PP pumps are water-cooled; however, optional
air-cooling systems are available on several sizes. Adjustable gas ballast valves are included as standard equipment for handling water and other vapor loads.

Features:
Operate continuously at Any Pressure Under 10000Pa
Lower Footprint Design of Moter on the pump,Lower water waste.
With Vibration Mounting- Quiet Running.
Easy Installation, No Special Requirement
Lub.oil fill with each other parts,No any metals contact inside.
With Gas Ballast Permits Handing of Condensable Vapors
Pump can be used at any applications,include dirty applications
The pump has a shaft and double sets of cams.no any attached parts to keep the balance, and running with quiet.

Technical parameters

model	PP70	PP150
normal displacement                                     m3/h(CFM)	255(150)	505(300)
motor power                                                  kw	5.5(7.5)	11(15)
rotary speed                                                  RPM	1055	870
oil capacity                                                     L(gallons)	23(6)	38(10)
cooling water consumption@60°F(16ºC)L/min(CFM)	4(1)	6(1.5)
weight    kg	364	693
maximum gas ballast flow                             m3/h(CFM)	34(20)	34(20)
typical blank-off pressure with 5% gas ballast        Pa(Torr)	266(2.0)	266(2.0)
ultimate pressure(Mcleod Gauge)                          Pa(Torr)	1.33(1x10-2)	1.33(1x10-2)
water inlet	G1/4"	G3/8"
water outlet	G3/8"	G1/2"
suction	3"ANSI	4"ANSI
exhaust	2"ANSI	3"ANSI
typical noise level @1330Pa                             Dba	71	72

 Capacity Curves


Overall dimensions
PP70


PP150


Typical applications
Vacuum furnace , Package , Coating





About Hangzhou Ever-power group(HZPT):
Q: Are you trading company or manufacturer ?
A: HZPT group consists in 3 factories and 2 abroad sales cooperations.we are making vacuum pumps,air compressors and gearboxes.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 30-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.,for customized products,50% downpayment is requested normally.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with detail size, material and further specifications;when you place orders,pleasure contact us in advance to communicate all details.

About vacuum pumps:
Q: How is vacuum measured?
A: one standard atmosphere at standard conditions will support a column of mercury 760mm high. This is where the linear measurement in vacuum comes into play.760mm can be also measured in inch Hg (760mm = 29.92″) and microns (760,000 microns = 760 mm = 29.92″). Depending on what vacuum level you require, you will use a different unit of measure for the vacuum measurement. When measuring vacuum below 1 micron, we go to scientific notation (Example: 1 x 10-3 mm Hg)
Q: What is an Absolute vacuum gauge?
A: An absolute pressure gauge is one that will measure your vacuum system without regard to and independent of local barometric pressure. Many dial (Bourdon) gauges and electronic Transducers reference local barometric pressure as their base measurement. However, since these devices are calibrated at SEA LEVEL conditions, operation of these devices above sea level will cause an erroneous reading. Either the gauge/transducer must be recalibrated for the higher elevation use or an absolute pressure gauge would need to be used.
A Torr gauge is an absolute pressure gauge and operates on the principle of an altimeter. The Gauge case is evacuated by the vacuum from the process and exerts a negative pressure on a hermetically sealed capsule. The lowering of the pressure in the gauge case causes the capsule to expand thereby causing the gauge movement to turn the pointer. The Torr gauge is highly sensitive and accurate in the lower pressure regions (0-100 mm Hg).
Q: how to judge vacuum degree?
A: Atmospheric Pressure- is variable but is standardized at 760 Torr or 101.325 kPa.
Low Vacuum- also called rough vacuum, is a vacuum that can be achieved or measured by basic equipment such as a vacuum cleaner.
Medium Vacuum- is a vacuum that is typically achieved by a single pump, but the pressure is too low to measure with a mechanical manometer. It can be measured with a McLeod gauge, thermal gauge, or a capacitance gauge.
High Vacuum- is vacuum where the MFP of residual gasses is longer than the size of the chamber or of the object under test. High vacuum usually requires multistage pumping and ion gauge measurement. NASA has revealed that the vacuum level recorded on the moon was 1×10-9 Torr.
Ultra-High vacuum- requires baking the chamber to remove trace gasses and other special procedures. Most standards define ultra-high vacuum as pressures below 10-8 Torr.
Deep Space- is generally much emptier than any artificial vacuum. Perfect Vacuum - is an ideal state of no particles at all. It cannot be achieved in a laboratory, although there may be small volumes which, for a brief period, happen to have no particles of matter in them.
Q: what type of vacuum pump should I choose for my application:
A: There is no one vacuum pump that is best for all applications. However, there are some general guidelines to remember for your selection.
Oil Lubricated Rotary Pumps are used in applications requiring fairly deep vacuum (< 1 mmHg) and pumping relatively clean gases (Air/N2). Oil lubricated pumps are available in Single stage & Dual stage depending on what vacuum level you need. Additionally, all the oil lubricated pumps are available in Belt drive or Direct drive configurations. Belt drive is preferred in applications where pump longevity and durability is desired because of the low pump rpm (<700 rpm) and their high oil holding capacity which also guards against premature wear from oil breakdown. Direct drive pumps are preferred because of their low cost, compactness and portability.
Dry Vane pumps; are used when a pump is required that does not require lubricating oil because of the objection to oil vapor discharge from the pump and filling/disposal issues with oil. Rotary vane dry pumps however are capable of only maximum vacuum of approximately 25″ Hg and can only pump clean DRY air. Any presence of moisture in the gas being pumped can lead to the pump rusting because of the absence of lube oil.
Rotary Screw Dry Pumps are used in applications where a high vacuum is required (up to 0 .010 mm Hg) and the process gas is not compatible with lubricating oil in oil sealed rotary pumps. These pumps are fairly expensive and are used where a lubricated oil sealed pump or liquid ring pump is not desired. Pleasure email us( [email protected] ) for more details.
Liquid Ring Pumps are used in applications where the process gas may contain a sizable amount of condensable vapors (water, solvents, acids, etc.) that will react negatively with the lubricating oil in Rotary Vane pumps, thereby causing pump damage. Being that a liquid ring pump is a centrifugal unit, the sealing medium can be water, oil or any other fluid compatible with the process. Liquid ring pumps are relatively inexpensive and can use any sealing fluid (water, oil, ethylene glycol, solvents, etc.) that is compatible with the process.
Q:what is gas ballast on vacuum pumps?
A: A gas ballast is a regulated in-bleed of a dry gas (usually Air/Nitrogen) into the compression portion of the pumping cycle of the vacuum pump. The gas acts as a stripping agent that will saturate with the contaminating vapors present in the pump and expelled out the discharge of the pump. Gas ballasts are usually installed as a standard component on all oil lubricated rotary vacuum pumps to aid in the removal of condensable vapors from the vacuum pump oil.