Agricultural Lift Pin

• Type: Agricultural
• Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
• Material: Iron
• Power Source: Electricity
• Weight: 0.75kg
• After-sales Service: Installation Guide 3-Year Warranty
• Model NO.: Agricultural Lift Pin
• Warranty: 3 Years
• Transport Package: Wooden Case/Pallet/Plywood Case
• Specification: 0.75kg
• Trademark: EP
• Origin: Zhejiang, China
• HS Code: 8432900000
• Production Capacity: 50000PCS/Month

Product Description

Agricultural Lift Pin

Product Description

Characteristic

 

The design, material and function of the lifting pin are important factors to understand. In order to make an informed decision, here are some tips for choosing the best lifting pin according to your needs. Here are some tips to help you select the best pedal lift pin as needed. Some of the most common lift pin types are listed below. You can also read their history and characteristics. After reading this article, you should have a clear understanding of the lift pins.
Pedal lift pin
If you have a pedal that is difficult to lift, a simple way is to buy a pedal lift pin. This is small but
The high efficiency device is installed on the foot pedal. The pedal lift pin can be attached to the brake shoe or positioned at
Pedal itself. These pins are usually made of stainless steel and can be found online. However, they may be difficult
Installation, so it is very important to use professionals to complete this work. The cage is configured to receive a locking pin and is inserted through a first hole and a second hole. This allows the foot pedal to be repositioned in the inoperative position, making it easier for the operator to move. Alternatively, the lifting aid assembly can be retrofitted to the previous lawn care equipment model. Pin and bracket assemblies are available for many different types of lawn care equipment.
cloth
The lifting pin is a simple and strong lifting equipment, which is very suitable for crane support and manual lifting. They are corrosion and
Weather resistant, often referred to as shackle pins. In general, borehole H11 is sufficient to lift the load; however
Special versions are available for specific applications. Read on to learn more about the lift pins. Here are some of their main
Advantages:
The lift pin is a component of the semiconductor wafer processing system 100. It is supported by base 106 and lift pin guide assembly 130. The figure shows the lifting pin fully extending above the base. 1. 2 and 3.
Design
The current design of the lift pins results in high temperature spots on the substrate. This is due to the lack of direct support for the substrate in the guide hole area. In addition, the temperature of the lifting pin is affected by the increase of plasma thermal radiation, which reduces the dissipation of radiant heat. Hot spots also negatively affect the deposition rate above the lift pins and reduce the uniformity of film thickness on the substrate surface.
A typical lift pin includes a shaft 202, a pin head 204, and a flared portion 212. Pin head 204 yes
It contacts the substrate 101 and provides a heat transfer interface. The flared portion 212 connects the shaft of the lifting pin to its upper end to prevent it from passing through the guide hole 118. Although not required, this function can enhance the heat dissipation capacity of the lifting pin.
effect
Lifting pins are lifting devices used to lift and move loads. Its length is determined by the load that the pin can bear
It may be too long to support a lifting device with a small pin, which will change the load and shorten the life of the chain. Larger pins can withstand higher loads, but may not be as effective as smaller pins. Smaller cotter pins are also less durable and are generally not available.
The lifting pin and actuator have two main components: the lip and the guide bushing. The lip seal forms a closed chamber
Environment to prevent air from passing through the lifting pin hole. These parts are connected by guide sleeves, which are usually made of materials compatible with the chamber environment. The lift pin and guide bushing may have several lip seals to improve the seal. Depending on the configuration, lifting pins can also be used in multi Li sealing systems to form an absolute seal.
problem
If there is something wrong with the elevator, it may be time to check the voltage limit switch. If you do not click or
The elevator doesn't work at all. There may be a problem with the switch. If not, you can temporarily bypass the switch by connecting a wire to the control rod and pressing the test button. If the lift still does not work, the switch may be stuck. If the problem is not found, the next step is to replace the switch.

 

Company Information