5V series 8-groove tapered bushing pulley applies to 5V, 5VX, 5V belts, and 5VX belts. They range in diameter from 7.10 "to 50.0". Depending on the pulley size, they use Q2, R2, S1, or U1 split tapered bushes, which we also have in stock. Most of our 8-groove 5V split tapered pulleys are high-strength 35 cast iron, coated with phosphate coating and anti-corrosion paint. All these are balanced at the factory to ensure the machine's smooth operation.
Support 5V, 5VX series V belt
(1) 5V series V-belt
Classic 5V series V-belts have a top width of 0.63 ", a thickness of 0.53", and an angle of 38 °. In addition, the 5V V-belt is one of the oldest V-belts in the industry. Because of their long-term success and economical operation, they are also one of the industry's most widely used belt series. The high-quality 5V series v-belts we provide are manufactured according to ISO 9001 specifications. They are oil and heat-resistant and can be directly interchanged with other brands. They are composed of natural rubber compound and polyester rope, covered with a mixture of cotton and polyester, and have high durability.
(2) 5V series ribbon V-belt
The 5V series v-belts are part of the "classic" v-belt series because they are one of the oldest and most common styles. Our belts are manufactured according to ARPM standards and have excellent strength, durability, and performance. The top width of each 5V series v-belt (belt/rib) is 0.63 ".
(3) 5VX toothed V-belt
The top width of the 5VX toothed v-belt is 0.53, "and the thickness is 0.53". Our grooved 5VX v-belts are manufactured with rough sidewalls to eliminate slip, improve efficiency and save operating costs. They are also manufactured according to ARPM standards and are oil and heat-resistant. The 5VX conveyor belt comprises high-quality neoprene compound and high-strength polyester rope, and the top fabric is made of a cotton polyester blend. In addition to the performance, durability, and energy-saving advantages, our v-belts will be used with existing vertical v-pulleys/pulleys.
(4) 5VX toothed V-belt
All our v-belts are manufactured according to ARPM specifications, with excellent performance and durability. Because of its design, the belt 5VX toothed v-belt runs more smoothly, is more relaxed and is generally more durable than the standard belt C v-belt. They also provide higher efficiency than ordinary v-belts, which means fewer energy costs. We can also stock pulleys/pulleys for 5VX belts. If you need more information or a quotation, please contact us, and we will be happy to help you.
Split tapered bushing
Split tapered bushes are one of the most commonly used bushes because they have high overall strength, are easy to install and unload, and have a high retention force to connect the shaft to the drive unit or idler gear assembly. Split tapered bushes are one of the most commonly used bushes because they have high overall strength, are easy to install and unload, and have a high retention force to connect the shaft to the drive unit or idler gear assembly. Open tapered bushes are used for various pulleys, conveyor pulleys, and sprockets. We have G series to W2 series split taper bushings and 0.375 inches to 7.438 inch and metric hole diameters.
V-belt 5V pulley
The 5V pulley is specially manufactured for 5V series V-belts and ribbon 5V belts. The size of our 5V v-belt pulley is manufactured according to ARPM standards so that it can be directly interchanged with other brands. There are only two types of 5V pulleys: taper lock and QD (quick disassembly), which can increase the flexibility of the aperture range. The difference between our pulleys and other pulleys on the market is that most pulleys are made of Grade 35 cast iron instead of the standard Grade 25 cast iron. This results in stronger pulleys and better wear resistance. In addition, it should be noted that these pulleys run more smoothly and have less vibration after dynamic balancing, thus extending the life of bearings and machinery. In addition, they are phosphate and paint to improve corrosion resistance.
Features and Advantages of Split Tapered Pulley
1. The belt is a kind of elastic body which can reduce the impact of the load and run smoothly without noise
2. Overload will cause the belt to slip on the wheel, thus protecting the entire machine
The grooves of most American standard pulleys apply to several different belt types, and the belt design and application are relatively flexible.
There are many types of American standard pulley grooves and tapered bushes. Some pulleys and bushes can be installed at the front and rear, which has become the solution under severe conditions on different occasions.
5. American standard pulleys and tapered bushes provide precise balance control and perform well in transmission.
The common application of QD bushing pulley
The pulley is a hub-type part. Generally, the relative size is relatively large. The manufacturing process is usually based on casting and forging. Use less cast steel (poor performance of cast steel); Generally, smaller dimensions can be designed for development, and the material is steel). The V-belt pulley is mainly used for long-distance power transmissions, such as the output of small diesel engines, agricultural vehicles, tractors, automobiles, mining machinery, machining equipment, textile machinery, packaging machinery, lathes, forging machines, and some small horsepower motorcycles. Transmission is the transmission of agricultural machinery power, air compressor, reducer, generator, cotton gin, etc. It is worth noting that before assembling the pulley, the last cleaning must be done with gasoline to ensure that the parts are clean and dry and that the mating surfaces are closely matched without oil and have sufficient friction.
Audited Supplier 
){kind=link}
){kind=link}