Agricultural Lift Arm for Kubota Tractor

• Type: Agricultural
• Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
• Material: Iron
• Power Source: Electricity
• Weight: 2kg
• After-sales Service: Installation Guide 3-Year Warranty
• Warranty: 3 Years
• Transport Package: Wooden Case/Pallet/Plywood Case
• Specification: 2kg
• Trademark: EP
• Origin: Zhejiang, China
• HS Code: 8708991000
• Production Capacity: 50000PCS/Month

Product Description

Agricultural Lift Arm For Kubota Tractor

If you're looking to repair your Kubota tractor's lift arm, this article will provide you with some helpful tips. You'll learn how
to check the speed control valve and how to install a new lift arm. These simple steps will have you back on the road in no time.Whether your tractor has been abused or simply needs a little TLC, you'll find what you need to repair it and get it back in top shape.
Repairing a kubota tractor lift arm
There are several steps you must take in order to repair a kubota tractor lift arm. First, you must turn off your tractor. Then,
locate the speed control valve assembly. Be careful; if you do not remove it correctly, you could end up spilling oil. Once you remove the valve, the lift arm should slowly lower itself, about one inch each hour of use. If it does not, this is a problem with the lift arm.
Checking a kubota tractor's speed control valve
If the speed on your kubota tractor suddenly stops, you might be able to pinpoint the cause by checking the speed control valve.After all, the speed control valve is one of the most vital components of a tractor's hydraulic system. If this part is
malfunctioning, the tractor will stop working quickly. You can also check the speed control valve by checking for broken return lines.
First, find the speed control valve. This is located under the seat between the operator's knees. Make sure the valve is fully
open, and attach a clean rag to it. Next, check the three point hitch speed control valve. It should be leaking if the three point arm link is broken. If the three point hitch has a drop, it might be a malfunctioning speed control valve.
In some cases, the valve may be leaking oil. This could happen if the oil viscosity is too high or too low, or if the pump is not properly attached to the pump. A leaking cylinder could also be caused by a damaged or worn shaft seal, or a leaking cylinder seal. To fix this issue, you should follow the manufacturer's instructions.
Fixing a kubota tractor lift arm
If the tractor hitch won't drop, the problem is most likely mechanical. In this case, it may be caused by binding of the lift
piston or the shaft mechanism. If the hitch isn't dropping, it could also be due to contamination of hydraulic fluid or
accumulation of rust inside the lift cylinder. There are two parts to a lift piston - the cylinder and the lift piston. To check
and replace the lift cylinder, you need to disassemble both the lift piston and the cylinder.

Company Information