Agricultural Grain Head Sprocket for Class Combine Baler

• Type: Agricultural
• Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
• Material: Iron
• Power Source: Electricity
• Weight: 4.58kg
• After-sales Service: Installation Guide 3-Year Warranty
• Model NO.: 651024
• Warranty: 3 Years
• Transport Package: Wooden Case/Pallet/Plywood Case
• Specification: 4.58kg
• Trademark: EP
• Origin: Zhejiang, China
• HS Code: 8433901000
• Production Capacity: 50000PCS/Month

Product Description

Agricultural Grain Head Sprocket For Class Combine baler

Characteristic

A grain head sprocket is part of a chain drive that transfers torque between two shafts. It is usually made of steel and goes through mechanical processing before it is coated with a protective paint. The sprocket serves as a mechanical drive part, and a farmer can easily replace it if he needs to. If you are planning to replace your old sprocket, here are some important things that you need to know.
Cutting platform drive pulley 107 of the material cutting device 1 by chain
A material cutting device is composed of a support for a material cutter and a reciprocating cutter. The support is connected to a drive pulley that raises and lowers the cutting part. The reciprocating cutter is connected to a feed auger, which is disposed in front of the material cutting device. The movable part comprises a horizontal contact device 198b and a chain.The cutting part can be composed of three independent cutting parts, each corresponding to a different cutting area. Each cutting part cuts a material of the corresponding cutting area, which is defined by the longitudinal component Z1 and Z2, which are of different lengths and can be programmed to cut different materials. The corresponding cutting area is shown by an arrow L.
As shown in Figs. 8 A to 11, the material cutting platform drive pulley 107 of the material cutting device 1 by chain is coupled to a motor apparatus 116. The drive pulley 107 extends across the housing. The shaft 91 carries a sprocket 47 and is connected to a break-down clutch 110.
Changing a row unit of a harvesting head
Modifying a harvesting head requires a system that includes a cutting disk, right angle gear set, drive shaft, and
counter-rotating discs. It may also require the removal of trash knives and stalk rolls, and drilling holes in the frame to mount the cutting disks. The method is typically performed by a tractor operator. In some cases, a tractor operator must stop the machine to make these adjustments.
Changing a row unit of a crop harvesting head for a class combine & baler can be accomplished by inputting the cutting force value from one sensor into another. The harvesting head can then merge the values from these sensors to adjust the speed and other settings. However, the process may not be as simple as it might seem. Changing a row unit on a harvesting head may be tricky, so it's best to consult a tractor manual.

Company Information